Heavy trucks and vehicles need timely maintenance all year round. But there’s a part that always gets overlooked during fleet maintenance and repair, your vehicle’s cooling system.
A cooling system creates a flow of coolant through the radiator. This fluid removes heat from the engine and transfers it from the vehicle to the air outside.
Suppose a problem occurs such as an oil leak or hose breakage. In that case, the coolant circulation system may not be able to remove enough heat from the engine, resulting in overheating and eventual engine failure. Overheating can also cause costly repairs and engine damage.
Here are five tips for your cooling system maintenance at all times to save yourself and your fleet from possible damage!
Ensure it’s full
Ensure your cooling systems are adequately filled with coolant during pre- and post-trip inspections. Most trucks have transparent tanks or sight glasses for checking coolant levels. Identifying leaks and fixing problems before they get out of control is vital to keeping maintenance costs down.
Ensuring your coolant is not on the dead end at regular intervals and not just before your truck inspection in Calgary will benefit your vehicle to run smoothly, regardless of how long your next journey is.
Use the same coolant
Maintenance professionals should understand which coolant fluids are used in factory-filled engines to avoid mixing incompatible fluids. Different coolants can cause problems for your whole system and reduce efficiency.
Your repairing professional should ensure that the coolant solution contains the correct corrosion protective chemicals. If you’re having trouble finding the correct coolant, we suggest choosing one with similar corrosion protection additives.
Use the right water
You should always use deionized water to mix with your cooling liquid. Never use water softened by a water softener. You can also use distilled water that is not softened because it does not contain any impurities that can affect the cooling system’s operation.
It must be purified because the chemical residues left behind after cooling can create acidic conditions inside the system. These acids attack the metals, causing them to corrode.
Keep the system clean
One of the essential parts of keeping your truck’s coolant system healthy is to flush the radiator regularly. Make sure you utilize the proper flush for your vehicle. Examine the plumbing for leaks and corrosion during engine repair and maintenance checks.
Also, clean and flush the system when cooler fluid is replaced. While cleaning the system is a small practice, some coolant issues can be fixed simply by cleaning. Corrosion, deposits, pitting, and erosion are just a few examples.
Avoid overloading
The heavier your car becomes, the greater the probability that your car’s cooling system will be harmed. Overloading is a significant cause of overheating because the load on the engine rises. Your brakes might also be damaged in this case.
Be sure to check and maintain the water level in your radiator constantly. Don’t fill up your radiator with cold water, specifically when operating. You can trust that your vehicle will cool off and if needed, increase water. Cooling water unfavourably affects aluminum chambers and may damage them, which means a lot to repair.
Heavy Truck Maintenance in Calgary
Keeping up with the fleet’s cooling system is necessary for any company. Having a heavy load truck means ensuring that the cooling system functions correctly.
When this happens, an expert must take care of the problem. A leak in the cooling system may cause severe damage to the engine of the vehicle, so you should contact a specialist to have it repaired immediately.